Late-Model Professional charcoal machine,Charcoal

Technical parameters ·Installed power: 15.5KW/23KW 380V 50hz Motor Power: 11KW/18.KW heat rating: 4.5KW ·Production capacity: 80kg-120kg/350kg-400kg ·Current consumption: <100kwh/t ·Overall dimension: 1670*684*1250 ·Total Weight: 580kg Φ50 900kg Φ80 ·Requirement for raw materials: 1)Water percentage: 8-12% 2)Granularity: ≤ 6mm ·Product performance: 1)Overall dimension: external diameterΦ55,inner diameterΦ20,length >50mm 2)Specific weight: 1200-1300kg/m3 3)Heating value: 4400-5000kcaI/kg Remarks: φ80 bar making machine: the matched motor reducer should be operated with 2-3kg lubricating oil. Installation 1.All bolts fastening, in particular, three sets of heating inside the heating barrel, connect the cooling water pipes, turn on the power. 2.Inspect all lubricant housings. 3.Inspect whether the voltage is normal or not. 4.After 5 minutes’ no-load running, you will have a normal production. Once something abnormal happened, the operator must stop immediately, and find out the reasons. After dealing with the trouble no-load running should start again. 5.The temperature regulator should be turned to the designated position. When the temperature reaches, just have a try of putting into limited materials. 6.Increase the materials until the qualified products are out. While normal production of 30 minutes it shows that the normal production runs. Elements The charcoal bar making machine make use of the inherent characteristics of wood raw materials, through the screw extrusion, high temperature, high pressure, the lignin in the wood materials will be plasticized so that micro-fibers can be combined each other to form a rod-like solid fuel.